|Product Name:||Thermally Conductive Encapsulant Gray Elastomer With Moderate Thermal Conductivity||Density:||1.8(g/cc)|
|Breakdown Voltage:||≥10（kv/mm）||Dielectric Constant:||5.5（@10mhz）|
Gray Thermally Conductive Encapsulant,
Shockproof Thermally Conductive Encapsulant,
Multiscene Heat Conductive Compound
Thermally Conductive Encapsulant Gray Elastomer With Moderate Thermal Conductivity
GF series thermally conductive potting encapsulant provides thermal conductivity and electrical insulative characteristics delivered in a two part dispensable and easily automated product. Additionally, the GF series provides protection from shock, dust, water, and vibration. It can be used for a long time from minus 60 ℃ to above 200 ℃. With the change of temperature, it is still elastic and will not crack. And good heat conduction and heat dissipation, extending the service life of electronic products.
Characteristics and advantages of Thermally Conductive Encapsulant: good thermal conductivity and flame retardancy, low viscosity, good leveling, curing to form a soft rubber, good impact resistance, strong adhesion, insulation, moisture resistance, earthquake resistance, corona resistance, electric leakage resistance and chemical medium resistance. When in use, it has good salt spray resistance and can protect electronic components from salt spray erosion; Water resistance is also good. It can isolate moisture and moisture from damage. In addition, the thermal conductive potting adhesive is an environmental protection product, which is not corrosive to any device, so don't worry.
How can l get the price?
-We usually quote within 24 hours after we get your inquiry(Except weekend and holidays)
-lf you are very urgent to get the price, please email us or contact us in other ways so that we can offer you a quote.
■ Thermal conductivity: 1.0~2.0W/m.K
■ Electrically insulating
■ High conformability
■ Flexible working time
■ Industrial: LEDs, Power Supplies
■ Automotive: OBC, DC/DC Converter, Amplifiers
■ Consumer Electronics: DC Converters, High Voltage Applications
Packing specification: 50mL(25mL each part)/ 400ml(200mL each part)/ 20kg(10kg each part)
Directions for use
• Working time @ 25C: 30-120 min
• For best results, ensure a 1:1 mix ratio is maintained
• Full cure @ 25C: 4 hours
• Full cure @ 100C: 5 minutes
Store in a cool, dry, well-ventilated place.
Shelf life of the product is 12 months after date of shipment.
|Composition||Ceramic filler + Silicone||-|
|Color/Component B||Sliver Grey||Visual|
|Breakdown Voltage(kv/mm)||≥10.0||ASTM D149|
|Dielectric Constant(@10mhz)||5.5||ASTM D150|
|Volume Resistivity(Ω.cm)||1.0*10^15||ASTM D257|
|Thermal conductivity(W/m.K)||0.8||ASTM D5470|
|Viscosity/Component A (cps)||4500||ASTM D2196|
|Viscosity/Component B (cps)||4500||ASTM D2196|
|Hradness,after cure(shore OO)||60||ASTM D22240|
|Working Time@25℃(min)||30||ISO 9048|
Contact Person: Jason Zhan