|Product Name:||1.4W/M.K Thermal Conductivity Thermal Insulation Silicone Pad For PV Inverter||Composition:||Silicone + Fiberglass Carrier|
|Hardness:||85 (Shore A)||Thermal Conductivity:||1.4W/m.K|
Antiwear Thermal Isolation Pads,
Odorless Thermal Isolation Pads,
Multipurpose Heat Transfer Pad
1.4W/M.K Thermal Conductivity Thermal Insulation Silicone Pad For PV Inverter
The components and parts in the PV inverter have their rated operating temperature. If the inverter has poor heat dissipation performance, as the inverter continues to work, the heat of components and parts cannot be transferred to the outside, the temperature will become higher and higher. Too high a temperature will reduce the performance and service life of components and parts. In order to keep the operating temperature of components and parts inside the inverter within the rated temperature range and ensure the efficiency and service life, Heat conducting materials are required to transfer the internal heat of the inverter.
The main heating devices are: switch tube, magnetic core element, transformer, etc. Therefore, in order to ensure that the components can work normally under the rated temperature, the heat dissipation capacity of the system is very important. The inverter usually uses natural heat dissipation, which requires full contact between the heating element and the radiator to better transfer heat. Heat conducting materials are indispensable. Generally, Thermal Insulation Pad is used, which has small thermal resistance and good heat conducting effect. If the insulation of power devices needs to be considered, Thermal Insulation Pad with insulating properties need to be used. Materials with high breakdown voltage, base material, tear resistance and puncture resistance meet this requirement.
Shenzhen Aochuan Technology Co., Ltd. was founded in 2004, headquartered in Shenzhen Mission Hills. Aochuan Technology is committed to becoming the world's leading supplier of thermal materials and solutions. The company possesses the ISO9001, ISO14001, IATF16949 quality management system certifications, with all products going through UL, SGS, RoHS certification.
AOK designs, develops and manufactures Thermal Interface Materials for industry leaders around the globe. Our core capabilities allow AOK to provide customers with customized solutions to meet their specific application needs.
■ 1.4 W/mK
■ Heat cure at 160C
■ Low thermal resistance
■ Electrically insulating
■ High shear strength
■ -40 to 200C use temperature
■ Networking and Telecommunications
■ Industrial: Power Supplies
■ Automotive: Power Modules, Inverters, LED
■ Consumer Electronics: Power Supplies, AC/DC Converting
|Composition||Silicone + Fiberglass Carrier||-|
|Shear Strength(MPa)@RT||1.4||ASTM D1002|
|Breakdown Voltage(kv/mm)||＞ 4.5||ASTM D149|
|Volume Resistivity(Ω.cm)||10^12||ASTM D257|
|Dielectric Constant(@1MHz)||5||ASTM D150|
|Thermal conductivity(W/m.K)||1.4||ASTM D5470|
Contact Person: Jason Zhan