|Product Name:||Wear-resistan Yellow Silicone Thermal Sheet Thermal Insulation Pad||Composition:||Silicone|
|Hardness:||85 (Shore A)||@160~180℃（mis.）3:||6|
Antiwear Thermal Insulation Pad,
PCB Thermal Insulation Pad,
Anti Insulation Thermal Pad PCB
Wear-resistan Yellow Silicone thermal sheet Thermal Insulation Pad
TC 1500B is a heat cure, low thermal resistance tape. This double-layer low-modules silicone provides low contact resistance and superior adhesion designed to absorb assemble and application shock and vibrations. This unique blend of modulus and strength also reduces application stress due to CTE mismatch.
Thermal Insulation Pad is a high-performance heat conducting interface material made of 100% imported materials for filling the air gaps between the heating device and the heat sink or metal base. Its softness and elasticity characteristics enable it to be used for covering a very uneven surface. Heat is transferred from the separation device or the entire PCB to the metal casing or diffuser to improve heat dissipation and improve the efficiency of heating electronic components and service life.
Thermal Insulation Pad is used to fill in air gaps between heat-generating electronic component and heatsinks,metal housing or chassis for intimate contact over rough or uneven surface textures to eliminate air gaps and reduce thermal resistance with high compliance.
Product features:High Performance Insulating Tape. Between high power component (such as MOSFET) and heatsink for screw and clip mounted application
Typical applications:Used to bond independent packaged semiconductors and heat sinks
our thermal pad series materials is very cost-effective materials which is made through advanced manufacturing process and with meeting the requirement of UL 94 V0 , RoHs and Reach compliance. Contact Us for further assistance with thermal pads, including thermal gap filler pads, thermally insulating foam, heat conductive pads, thermal conductive pads, and thermal interface pads.
■ 1.4 W/mK
■ Soft and flexible, reducing the interface thermal resistance
■ High electrical insulation to protect sensitive electronic devices
■ Electrically insulating
■ High shear strength
■ -40 to 200C use temperature
■ Networking and Telecommunications
■ Industrial: Power Supplies
■ Automotive: Power Modules, Inverters, LED
■ Consumer Electronics: Power Supplies, AC/DC Converting
|Composition||Silicone + Fiberglass Carrier||-|
|Shear Strength(MPa)@RT||1.4||ASTM D1002|
|Breakdown Voltage(kv/mm)||＞ 4.5||ASTM D149|
|Volume Resistivity(Ω.cm)||10^12||ASTM D257|
|Dielectric Constant(@1MHz)||5||ASTM D150|
|Thermal conductivity(W/m.K)||1.4||ASTM D5470|
Contact Person: Jason Zhan