|Product Name:||Gray Silicone Rubber Thermal Conductive Glue CPU Heat Sink Thermal Grease||Composition:||Non-Vulcanized Silicone Oil And Thermally Conductive Filler Mixture|
|Usage Temperature:||-40~150（℃）||Thermal Conductivity:||1.0±0.1（W/m.K）|
Tasteless Heat Sink Thermal Grease,
CPU Heat Sink Thermal Grease,
Nontoxic CPU Cooling Grease
Gray Silicone Rubber Thermal Conductive Glue CPU Heat Sink Thermal Grease
TG series thermal grease is a high thermally conductive grease. With superior wetting capabilities, contact resistance is minimized. When these characteristics are combined with its ability to resist pump out, TG Series thermal grease is suitable for a myriad of applications.
Product features:Low oil separation (towards 0), long-lasting type, good reliability, strong weather resistance (high and low temperature resistance, moisture resistance, ozone resistance, aging resistance, etc.)
Typical applications:IT: Notebooks, Tablets, Memory Modules
Heat Sink Thermal Grease is a kind of silicone material with high thermal conductivity and insulation. It is almost never cured. It can be used at -50 ℃ - +230 ℃ for a long time. It is widely used in the contact surface between the heating body (power tube, thyristor, electrothermal reactor, etc.) and the heat dissipation facilities (heat sink, heat strip, shell, etc.) in electrical equipment, which is conducive to the heat conduction and heat dissipation of the heating body, so as to ensure the stability of the electrical performance of electronic instruments and meters! For example, power amplifier, transistor, electron tube, CPU and other electronic devices.
Heat Sink Thermal Grease, also known as heat dissipation paste and thermal conductive paste, is a kind of silicone material with high thermal conductivity and insulation. At the same time, the product has low oil separation (tending to zero), high and low temperature resistance, water resistance, ozone resistance and weather aging resistance. It can be kept in the cream state for a long time at the temperature of -50 ℃ - +230 ℃. Product performance: thermal conductive silicone grease has high thermal conductivity, excellent thermal conductivity, good electrical insulation (only for insulating thermal conductive silicone grease), wide service temperature, good service stability, low consistency and good construction performance.
■ Thermal conductivity: 1.0~5.0W/m.K
■ non toxic, tasteless, non corrosive, stable chemical and physical properties
■ High reliability
■ Minimizes contact resistance
■ excellent thermal conductivity, electrical insulation and use stability, good high and low temperature resistance.
■ it is applicable to the contact surface between power amplifier tube and heat sink in the electronic industry: such as TV, DVD, CPU and power amplifier tube, which plays the role of thermal media
■ suitable for surface coating and overall potting of microwave communication, microwave transmission equipment, special power supply, regulated power supply and other microwave devices
■ Industrial: LEDs, Power Supplies
■ Consumer Electronics: Gaming Systems, LCD TVs, Displays
Packing specification: 30mL/ 1Kg 2Kg 10Kg
Clean the application surface first, then stir the silicone grease evenly, and then apply the silicone grease to the surface by dot coating, brushing or screen printing. If screen printing is used, it is recommended to use 60-80 mesh nylon screen, and a rubber scraper with a hardness of about 70. When coating, apply silicone grease at about 45 degrees to the coated surface. After the operation, unused products should be sealed and stored in time.
Shelf life & Storage:
Shelf life of the product is 6 months after date of shipment. Store in a cool, dry, well ventilated place.
|Composition||Non-Vulcanized Silicone Oil and Thermally Conductive Filler Mixture||-|
|Thermal conductivity(W/m.K)||1.0||ASTM D5470|
|Thermal Resistance(℃-in2/W)0.1mm@50psi)||0.15||ASTM D5470|
Contact Person: Jason Zhan