|Product Name:||1W/MK White Silicone Heat Sink Thermal Grease For CPU & GPU Support To OEM&ODM||Composition:||Non-Vulcanized Silicone Oil|
|Thermal Conductivity:||1.0±0.1（W/m.K）||Thermal Resistance:||0.15 (℃-in2/W)0.1mm@50psi|
Anticorrosive Heat Paste For CPU,
Odorless Heat Paste For CPU,
Anticorrosive Computer Thermal Grease
1W/MK White Silicone Heat Sink Thermal Grease For CPU & GPU Support To OEM&ODM
TG series thermal grease is a high thermally conductive grease. With superior wetting capabilities, contact resistance is minimized. When these characteristics are combined with its ability to resist pump out, TG Series thermal grease is suitable for a myriad of applications.
Ordinary Heat Sink Thermal Grease is made of aluminum oxide and other metal oxides as thermal conductive fillers. High thermal conductive silicone grease is made of nitrides such as boron nitride as thermal conductive fillers (or aluminum oxide is specially modified) and corresponding organic silicone oil. The thermal conductivity of ordinary thermal conductive silicone grease is only 0.3-0.8 w/ (m · K), and that of high thermal conductive silicone grease can reach 5.0w/ (m · K). Compared with ordinary thermal conductive silicone grease, high thermal conductive silicone grease has better thermal conductivity. At the same time, it is no less than ordinary thermal conductive silicone grease in terms of temperature resistance, insulation performance and performance stability. Coating it on the assembly surface of power devices and radiators will help eliminate the air gap on the contact surface, increase heat flow, reduce thermal resistance, reduce the working temperature of power devices, improve reliability and prolong service life.
Thermal conductive silicone grease is a kind of material used to fill the gap between CPU and heat sink, which is also called thermal interface material. Its function is to transmit the heat emitted by the CPU to the heat sink, keep the CPU temperature at a stable working level, prevent the CPU from being damaged due to poor heat dissipation, and extend the service life. In the application of heat dissipation and heat conduction, even two planes with very smooth surfaces will have gaps when they are in contact with each other. The air in these gaps is a poor conductor of heat, which will hinder the conduction of heat to the heat sink. Thermal conductive silicone grease is a kind of material that can fill these gaps and make the heat conduction more smooth and rapid.
■ Thermal conductivity: 1.0~5.0W/m.K
■ No cure required
■ High reliability
■ Minimizes contact resistance
■ extremely low volatilization loss, non drying and non melting, good material adaptability and wide temperature range (-50 ∽ +250 ℃)
■ suitable for surface coating and overall potting of microwave communication, microwave transmission equipment, special power supply, regulated power supply and other microwave devices
■ IT: Notebooks, Tablets, Memory Modules
■ Industrial: LEDs, Power Supplies
■ it is suitable for filling the gap between the heating body and the heat dissipation facilities in various electronic and electrical equipment to improve the heat dissipation effect
Packing specification: 30mL/ 1Kg 2Kg 10Kg
Clean the application surface first, then stir the silicone grease evenly, and then apply the silicone grease to the surface by dot coating, brushing or screen printing. If screen printing is used, it is recommended to use 60-80 mesh nylon screen, and a rubber scraper with a hardness of about 70. When coating, apply silicone grease at about 45 degrees to the coated surface. After the operation, unused products should be sealed and stored in time.
Shelf life & Storage:
Shelf life of the product is 6 months after date of shipment. Store in a cool, dry, well ventilated place.
|Composition||Non-Vulcanized Silicone Oil and Thermally Conductive Filler Mixture||-|
|Thermal conductivity(W/m.K)||1.0||ASTM D5470|
|Thermal Resistance(℃-in2/W)0.1mm@50psi)||0.15||ASTM D5470|
Contact Person: Jason Zhan