|Product Name:||High Thermal Conductivity 1.0W Heat Sink Thermal Grease Gray 1kg Canned For CPU Radiator||Composition:||Thermally Conductive Filler Mixture|
|Thermal Conductivity:||1.0±0.1（W/m.K）||Thermal Resistance:||0.15 (℃-in2/W)0.1mm@50psi|
Non Corrosive Heat Sink Thermal Grease,
Tablets Heat Sink Thermal Grease,
tasteless CPU Heatsink Grease
High Thermal Conductivity 1.0W Heat Sink Thermal Grease Gray 1kg Canned For CPU Radiator
TG series thermal grease is a high thermally conductive grease. With superior wetting capabilities, contact resistance is minimized. When these characteristics are combined with its ability to resist pump out, TG Series thermal grease is suitable for a myriad of applications.
Heat Sink Thermal Grease, also known as heat dissipation paste and thermal conductive paste, is a kind of silicone material with high thermal conductivity and insulation. At the same time, the product has low oil separation (tending to zero), high and low temperature resistance, water resistance, ozone resistance and weather aging resistance. It can be kept in the cream state for a long time at the temperature of -50 ℃ - +230 ℃. Product performance: thermal conductive silicone grease has high thermal conductivity, excellent thermal conductivity, good electrical insulation (only for insulating thermal conductive silicone grease), wide service temperature, good service stability, low consistency and good construction performance.
There are many types of silicone grease on the market. Different parameters and physical properties determine different uses. For example, some are applicable to CPU heat conduction, some are applicable to memory heat conduction, and some are applicable to power supply heat conduction. The liquid part of thermal conductive silicone grease is composed of silica gel and silicone oil. Most products in the market use dimethyl silicone oil as raw material, while the boiling point of dimethyl silicone oil is between 140 ° C and 180 ° C, which is prone to volatilization and oil leakage, leaving traces of grease on the circuit board. Grease detachment may make the customer feel that the silicone grease is dry.
■ Thermal conductivity: 1.0~5.0W/m.K
■ water resistant, non curing, non corrosive to metal materials in contact (copper, aluminum, steel)
■ non toxic, tasteless, non corrosive, stable chemical and physical properties
■ High volume applications
■ Networking and Telecommunications
■ IT: Notebooks, Tablets, Memory Modules
■ Industrial: suitable for surface coating and overall potting of microwave communication, microwave transmission equipment, special power supply, regulated power supply and other microwave devices
■ effective thermal connection for many heat sinks requiring effective cooling
Packing specification: 30mL/ 1Kg 2Kg 10Kg
Clean the application surface first, then stir the silicone grease evenly, and then apply the silicone grease to the surface by dot coating, brushing or screen printing. If screen printing is used, it is recommended to use 60-80 mesh nylon screen, and a rubber scraper with a hardness of about 70. When coating, apply silicone grease at about 45 degrees to the coated surface. After the operation, unused products should be sealed and stored in time.
Shelf life & Storage:
Shelf life of the product is 6 months after date of shipment. Store in a cool, dry, well ventilated place.
|Composition||Non-Vulcanized Silicone Oil and Thermally Conductive Filler Mixture||-|
|Thermal conductivity(W/m.K)||1.0||ASTM D5470|
|Thermal Resistance(℃-in2/W)0.1mm@50psi)||0.15||ASTM D5470|
Contact Person: Jason Zhan